Wednesday, 13 February 2013

Chapter 6 Patterning of fabrics using dyes and paints

In order to build up a collection of patterned black and white cotton fabrics based on patterned papers in Chapter 5 and from drawings of animal markings in Chapter 4: 
  • Collected a number of black and white cotton fabrics some with abstract patterns (see personal collection)
  • Cold water dyed A4 size white cotton fabrics with Dylon black
  • Monoprinting - Painted A4 size white cotton fabrics with black acrylic and clear fabric medium 
 Cold water dyed A4 size white cotton fabrics with Dylon black

Samples were made of
  • Plain black pieces
  • Shibori tie and dye
  • Tritik Shibori
  •  Arashi Shibori

The following handwritten sheets indicate the procedure followed to acquire a number of samples. (Taken from my sketchbook)



Here is a photo of me dyeing all item types


Health and Safety is noted in my sketchbook Chapter 6 page 6
 
  • Plain black pieces
  • I found that different intensity of dye resulted, between greyer versions of the first attempt and darker blue/black in the second attempt. (Each are labelled)





    These were made alongside the Shibori samples

    Shibori is a name given to several methods where tight pressure is put on certain areas to form a resist to the dye, in this case leaving areas of white against black.

  • Shibori 'tie and dye'
  • I must be the worst 'tie and dye' practitioner.
    After at least three attempts I did not really suceed.
    The following shows a photo of some prepared fabrics (four items on the right) and a couple of dyed samples, the best of a bad bunch.  I assume that I was unable to get the mix of dye, salt and soda correct and/or timing of the dyeing and drying.
    The final scan in this section indicates some of the dyeing mixes I used.



    The subtle lines are appropriate for slug and snail markings 

  • Tritik Shibori
  • For this the fabrics are hand or machine stitched to gather the fabric together, then the dye is painted using a brush at the edges and left to dry.
    The first two photos show the stitching before and after the rows are gathered.  I only did handstitched samples.
    The samples were left to dry overnight.
    I particularly liked the results and felt that all seemed to reflect the slug and snail theme. 







    Arashi Shibori

    For this the fabric is wrapped around piping or in this case cardboard tubes (see two samples on the left of the first photo) sealed with cling film, tied tightly with string, gathered then painted with dye using a paint brush down the ridges.
    They were then left to dry overnight.
    Both samples were successful and seemed to provide an effect suited to slugs and snails.








    Monoprinting -
    Painted A4 size white cotton fabrics with black acrylic and clear fabric medium 
    The following handwritten sheets indicate the procedure followed to acquire a number of samples. (Taken from my sketchbook)



    Here is a photo of me monoprinting all item types


    Health and Safety is noted in my sketchbook Chapter 5 pages 1 and 5

    The following samples are itemised above and are in order: 
    Samples MF2a and 2b, MF3a and 3b, MF6 (silk), MF7 (silk), MF8, MF9 and white acrylic with clear fabric medium on one of the grey dyed pieces.

                                                                  




      



    Of all the techniques in this chapter I enjoy the rapid results achieved with monoprinting, with more effective tonal variation.  I'm sure with practice the dyeing techniques will improve although I was very happy with the Tritik Shibori, in particular where tonal variaton was evident.  Also these achieved the markings I wanted.

    Last but not least another paper design achieved by leaving fabrics to dry flat on it.  Maybe I could have done the same with some fabric!








    Monday, 28 January 2013

    Chapter 5 Making patterned papers

    A4 patterned papers were made continuing inspiration from slugs and snails.
    Samples were selected using different techniques:

    Ink marks using Quink Ink
    Bleach marks on black tissue
    Monoprints using black acrylic paints

    Ink marks using Quink Ink
    All were made on A4 photocopy paper.
    Each sample used unconventional drawing equipment.
    The technique was written on the back of each sample
    Here are 6 samples from 15.  The first 2 used neat Quink ink, showing darker tones than the other 4, where diluted ink was used producing paler versions (not necessarily black or grey colours)

    Q 1 Enlarged pattern from the lower parts of a snail, drawn with a sponge brush

    Q 3 Snail shells, drawn using the end of the sponge brush and dabbed producing solid wetter ridges and drier ridges



    Q 6 Parts of snail shells, using pieces of flat kitchen sponge, where lay down end then dabbed down rest of the sponge, giving a variety of tone


    Q 7 Slug body, using toothed credit card approximately 3" wide for ridges overlaid with edge of sponge for speckled effect


    Q 8 Part of snail shell using flat surface of a piece of sponge


    Q 11 Snail shell with curved arrangement of marks using crinkled bathroom hand paper towels with interesting variety of tonal change

    There is interesting tonal differences between samples.
    Possibly even more effect on last 4 if neat ink was used.

    Bleach marks on black tissue
    The first 3 were made on slightly smaller A4 size black tissue paper, the final 4 on strips of black tissue approximately 4cm x 30 cm
    Each sample used unconventional drawing equipment.
    The technique of each sample was noted in the sketchbook
    Here are 3 samples from 6, on A4 paper where the first used thin bleach the remaining 2 thicker bleach, with more effect. 

    B 2 Used a cut credit card approximaetly an inch wide with 3 cut points wiped intermittently across the paper.  The crinkly paper adds to the texture

    B 5 Used a cotton bud first dabs on the paper then wiped across

    B 6 Used a plastic fork with short marks - It was interesting how the thicker bleach also added some interesting lines, catching drips across the paper

    B 7 to 10 were respectively, wavy lines using a lollipop stick; wavy lines using a cocktail stick; wavy lines using a narrow piece of credit card; using a cotton bud


    I feel like giving this technique another go using the thicker bleach might provide better results.
    Also, found that I was abandoning reference to the animal markings, but got some interesting results nonetheless. 

    Monoprints using black acrylic paints
    I particularly liked the results using this technique.
    Some can be compared with the Quink Ink samples.
    All were on A4 photocopy paper, having drawn or spread black acrylic paint on glass.

    Each sample used unconventional drawing equipment.
    The animal source and technique was written on the front of each sample
    Here are 7 samples from the 9 samples made: M1,M2,M4,M5,M6,M7,M9
    The first 6 used thick black acrylic, showing darker tones whereas the last used watery paint producing paler versions.
    M6 and M7 also were the result of coating the glass with paint then removing paint to give white marks. 







     And what an interesting result from the kitchen roll used to wipe off the paint on the glass!

    Some additions to this chapter related to scale in work, following up Sian's suggestion:

    Two items resulting from scale manipulation of designs produced in word
    Photo of a selection of original ink, bleach and monoprint designs showing tonal variation

    Two items resulting from scale manipulation of designs produced in word


    Looking forward to using the above in Chapter 7. 

    Photo of a selection of original ink, bleach and monoprint designs showing tonal variation
    I added some designs not added earlier to my blog....


    ...and the next shows the top half closer up, including bleached black tissue.

     



    It's really interesting seeing how scale can effect your work.

    Wednesday, 23 January 2013

    Chapter 3 Tonal effects in machine stitchery

    This chapter is divided into four sections and highlights stitched patterns related to animal markings of slugs or snails for inspiration:
    1. Tonal machine stitching using ordinary stitchery (Samples 1 to 10)
    2. Whip stitch effect (Samples Whip 1 to Whip 3)
    3. Cable stitch effect (Samples Cable 1 to Cable 3)
    4. Making machine stitched strips                                                        (Samples a to d on white cotton)                                                        (Samples e, f and h on black cotton)                                                          Wider stitched lengths that can be cut up (Samples g and i)         Selected commercial patterned fabrics                                                   

    Tonal machine stitching using ordinary stitchery (Samples 1 to 10)
    Each sample is 10cm by 10 cm (showing the top of the fabric)






    I feel samples 4,5,6,7 and 10 are particularly effective in showing tonal variations 
    (In my sketchbook is a spreadsheet showing techniques used for each sample)


    Whip stitch effect (Samples Whip 1 to Whip 3)
    Each sample is 10cm by 10cm
    These show the top of the worked samples.  However I have also included the reverse of sample Whip 2 for its tonal effect
    All were worked with white thread on top and black thread in the bottom spool



    I feel sample Whip 2 is particularly effective in showing tonal variations both top and reverse of the fabric.
    (In my sketchbook is a spreadsheet showing techniques used for each sample)


    Cable stitch effect (Samples Cable 1 to Cable 3)
    Each sample is 10cm by 10cm
    These show the back of the worked samples.  All were worked with white thread on top and black thread in the bottom spool.
    Using the Janome machine using top tension of 9 and not altering the spool tension.




    I feel sample Cable 3 is particularly effective in showing tonal variation
    (In my sketchbook is a spreadsheet showing techniques used for each sample)

    Making machine stitched strips                                                                  Samples a to g are 4cm by 30cm. Samples h and i are wider. 
    Only 1 to 3 rows are shown on each sample except h and i.  It is planned to produce more rows for each width in later work.  In the meantime it is interesting to see some tonal differences along the length of the strips.  Further tonal variation would be achieved with additional rows.
    (In my sketchbook is a spreadsheet showing techniques used for each sample) 


    Making machine stitched strips (Samples d to a on white cotton)
    These show the top of each worked sample followed by reverse. 
    All were worked with black thread on the top and white thread in the bottom spool.




    I feel it was particularly interesting how altering the top tension in Sample b brought up the white thread


    Making machine stitched strips (Samples e, f and h on black cotton)
    These show firstly, the top of the worked samples followed by reverse. 
    All were worked with black thread on the top and white thread in the bottom spool. 
    Samples e and f used the whip stitch effect, sample h cable stitch effect





    I feel Sample e and f are particularly effective inspired by the ridges on the body of a slug, including the reverse of Sample f.

    Making machine stitched strips (Samples g and i)
    Samples g and i are 8cm and 14cm wide respectively by approximately 30cm.
    These larger samples can be cut up for use later.

    Sample g on calico is shown above with Samples e,f and h.
    It was worked with black thread on the top and white thread in the bottom spool. 
    It has produced an interesting pattern with overlapped rows but not as much tonal variation as Sample i below.


    The above sample shows the first layer of stitch.


    Rows were stitched across to form a second layer.
    In order to add differing threads the fabric was turned over in order to add cable stitch effect for the third layer and to allow for variation in thickness and type of thread.
    The following shows the reverse of the worked sample.


    Both sides show different tonal variations.

    Selected commercial patterned fabrics                                                   
    They are all 4cm by 30cm.
    Finally I selected some interesting fabrics for possible use later, to use as they are or stitched over. 
    The reverse side of two samples could be used as well as main side (see third and fifth below).
     

    It was fascinating discovering the versatility of the sewing machine.
    Which foot to use, whether the foot is up or down, whether a hoop is used or not.  Altering the upper tension to 9(I'm afraid I didn't alter the lower - I'd mislaid my spare spool case), worked for cable stitch samples.  
    I look forward to experimenting further as I progress through the module. 

    Monday, 10 December 2012

    Chapter 4 Drawing patterns from animal markings

    This chapter contains sketches to highlight patterns and tonal changes on enlarged images of animal markings.

    The first illustration is the first page indicating sketch tools used and how the images were created.


    Samples (1) to (7) are sketches from different animals, with most emphasis on snails and slugs:-
    1.  This was a dark image of a real pheasant feather.  Used markers b. to e. and noticed how b. turned out bluey black.  The lines on the feather were beautifully parallel (unlike my copies) and picked up cross marks and two or three dark markings forming feather patterns. 

    2.  These moth drawings were from a more balanced black and white image.
    There were several different patterns and textures.  The patterns were picked up in the sketches rather than the shadings. 


    3.  This is a gray scale image of a seahorse.  It is the only one where shading was done with a 4B pencil.  There is a wide contrast in tone from the black of the eye to white of the dots on the end of the spines.  I chose grayscale to see more of the shapes and patterns.  The black and white image was very like polka dots - no problem, but preferred chosen image, especially the shape of the spines or tentacles!


    4.  The snail has many patterns and I was struck as to how many dots form the image.
    The variation in pattern was from solid black shapes to subtle dotted lines.


    5.  The contrast in tone between black and white in the slug is reflected in how light catches the moist skin surface.  There were an amazing range of patterns and I tried to capture the most distinct, using all felt tips.


    6.  This time concentrated on snail shells.  Although there were many dots used line to show pattern; swirls of the shells and fine ridges across them.  Used all felt tips trying to grade tone using spacing and changing the pens.

    7.  Snail mouth shown under a microscope.  See comments on the sheet.

    Although a technical pen was not used I hope I have captured tone and pattern successfully by varying different felt tips I had available.